Actuator Outdoor CTL (s) -10 U1
privodi
CTL Series Drives (s) -10 U1 designed to operate main and earthing switches disconnectors RLND series (s) at 10 kV.

privodi1privodi2

Symbol structure CTL (s) -10 U1:
U – drive;
P – manual;
N – outdoor;
W – the presence of shafts for controlling grounding knives;
10 – Rated voltage, kV;
U1 – climatic modification and placement category according to GOST 15150-69.

Terms of Use:
Altitude 1000 m. Ambient temperature from -45 to 40 ° C for execution U1 drives. Relative humidity up to 100% at 25 ° C. Environment not explosive, the content of corrosion-active agents corresponds to an atmosphere of type II according to GOST 15150-69. Safety Requirements in accordance with GOST and GOST 12.2.007.0-75 12.2.007.3-75. The drives comply with the requirements of GOST 689-90.

Specifications:
Rated torque at the output shaft, Nm – 100 Turning angle of output shafts, degrees – 90 Fixed MTBF, IN cycles – no less than 3,000.

Design and function:
The actuators consist of a body, the output shafts and fasteners. The enclosures are mounting holes. By the output shafts are welded wheels, which are mounted plates that serve to operate the drive, and plates, which are welded to the pipe connecting the drive to disconnect at the installation site. The drive fixing the extreme positions of the handle and locking shaft padlock in the on and off positions isolator.

Attention! The manufacturer is constantly working to improve the design and manufacture of drive technology PRN (s) -10 U1 and reserves the right to change the design of the drive, do not adversely affect the specifications, nor does it affect the installation and operation conditions.