Switches of loading of the VNA 10/630 20 UZ
Load Switches are designed to enable and disable the load circuit sections alternating current three-phase power frequency of 50 Hz, rated voltage up to 10 kV, as well as the disconnected ground stations using the grounding.
Switches are designed (in conjunction with the drive) for use in closets complete switchgear (KRU), chambers national teams of unilateral service (CSR), cabinets of complete transformer substations (CTS) and other electrical devices for indoor installation at voltages of up to 10 kW three-phase alternating current frequency of 50 Hz for systems with grounded and insulated neutral.
Continue reading “Switches of loading of the VNA”
Disconnectors internal series installation EEO -6 (10), RVF (Z) -6 (10)
Isolator is an electrical device designed to create a visible gap in the three-phase electrical circuits, AC 50 Hz voltage of 6 kV and 10 kV in the absence of load current in the line.
Continue reading “Disconnectors Indoor Series EEO -6 (10), RVF (Z) -6 (10)”
Disconnectors Outdoor RLND series 10/400 (630) U1
Disconnecting RLND (s) 10/400 (630) U1 are:
– To create a visible break the electrical circuit to ensure safe maintenance of electrical equipment;
– To enable or disable energized de-energized parts of the high voltage circuit;
– Grounding of disconnected sites by using fixed earthing;
– For opening and closing load current transformers.
Actuator Outdoor CTL (s) -10 U1
CTL Series Drives (s) -10 U1 designed to operate main and earthing switches disconnectors RLND series (s) at 10 kV.
Continue reading “Actuator Outdoor CTL (s) -10 U1”
Actuator a manual lever type PR-10 V2
Drive a manual lever type PR-10 V2 is designed to enable and disable the load disconnect switch or circuit breaker for voltage up to 10 kV, under normal and emergency modes, latching in the on and off position and lock these positions or only in the open position.
Continue reading “Actuator a manual lever type PR-10 V2”